Plastic Granulator - ToronPR™ PG Series
Plastic Granulator for Film, Bottles, Caps and Small Pipe
The plastic granulator cuts thin, small plastic parts into uniform regrind ready for washing, pelletizing, or direct reuse. Recyclers, molders, and bottle processors use it for loose film, PE, PP, and PET bottles, caps, baskets, woven bags, and small pipe. The ToronPR™ PG runs a high-speed rotor against fixed knives, slicing material cleanly into consistent particles. Six models cover rotor diameters of 220 to 580 mm with motor power up to 90 kW.
Granulators work best on material that is already reasonably small and thin-walled. Bundled bales, heavy lumps, and large parts should pass through a shredder first, then feed the granulator for final sizing. Three blade styles (slice, flat, and claw) let each machine match the material it will cut most. Torontech selects the blade structure according to the plastic type, wall thickness, and regrind quality the plant needs.
The ToronPR™ PG fits as a standalone grinder beside a production line or as the sizing stage inside a washing or recycling line. Compact models suit in-plant scrap from molding and blow molding presses. Larger models handle bottle and film streams at recycling facilities. Each unit can feed a downstream washer, extruder, or storage bin.
Plastic Granulator - ToronPR™ PG Series Applications

This plastic recycling granulator suits operations that need consistent regrind from thin or small plastic parts.
- PET Bottle Recycling/PET Bottle Granulator: granulating whole or pre-sorted PET bottles into flake for hot washing and pelletizing
- PE and PP Bottle Recycling: reducing HDPE and PP bottles, jugs, and containers into regrind for washing lines
- Cap and Closure Recovery: granulating bottle caps and closures separated during PET bottle recycling
- Film and Woven Bag Recycling: cutting loose, unbundled film and woven bags into flakes before washing or pelletizing
- Injection and Blow Molding Plants: regrinding sprues, runners, rejected parts, and thin-walled scrap beside the press
- Basket and Crate Scrap: reducing thin-walled baskets, trays, and crates into regrind
- Small Pipe Scrap: granulating short, small-diameter pipe and tube offcuts

Plastic Granulator - ToronPR™ PG Series Key Features

The granulator combines a high-speed cutting rotor with blade options matched to each material.
- High-Speed Scissor Cutting: a rotor turning at 550 to 600 rpm slices material cleanly against fixed knives for uniform regrind
- Three Blade Styles: slice, flat, and claw blades are selected according to the material being processed
- Wide Material Range: handles loose film, PE, PP, and PET bottles, caps, baskets, woven bags, and small pipe
- Scalable Rotor Sizes: rotor diameters of 220 to 580 mm suit in-plant scrap and recycling-line throughput
- Up to 60 Rotating Knives: larger models carry more knives for more cuts per rotor turn
- Flexible Line Position: works as a standalone grinder or as the sizing stage within a recycling line
- Six Model Sizes: motor power spans 7.5 kW through 90 kW
Theory and Method
Granulating relies on a high-speed scissor cut. A rotor carrying several knives spins at 550 to 600 rpm inside a cutting chamber lined with fixed bed knives. Each rotor knife sweeps past a fixed knife with a narrow gap, slicing any material caught between them. High tip speed gives clean, repeated cuts that break thin plastic into small, uniform particles.
Material stays in the cutting chamber until it is small enough to leave. Granulators of this type typically discharge through a sizing screen beneath the rotor, so regrind size depends on the screen opening. Pieces that are still too large return to the knives for another cut. This repeated cutting produces regrind with a narrow size range, which feeds washers and extruders consistently.
Blade geometry shapes how the machine cuts. Slice-type and flat blades give long, clean shearing edges that suit thin film, bottles, and sheet-like scrap. Claw-type blades bite into thicker or harder parts, such as caps and basket walls, and pull them into the cutting zone. Choosing the right blade style keeps cutting efficiently and limits fines and heat in the regrind.
Plastic Granulator - ToronPR™ PG Series Technical Specifications
| Parameter | ToronPR™ PG 400 | ToronPR™ PG 500 | ToronPR™ PG 600 | ToronPR™ PG 800 | ToronPR™ PG 1000 | ToronPR™ PG 1200 |
|---|---|---|---|---|---|---|
| Rotor Diameter | 220 mm | 280 mm | 320 mm | 450 mm | 450 mm | 580 mm |
| Rotor Speed | 550 rpm | 550 rpm | 600 rpm | 600 rpm | 600 rpm | 600 rpm |
| Rotating Knives | 12 pcs | 15 pcs | 18 pcs | 24 pcs | 30 pcs | 60 pcs |
| Fixed Knives | 2 pcs | 2 pcs | 4 pcs | 4 pcs | 4 pcs | 4 pcs |
| Motor Power | 7.5 kW | 15 kW | 18.5-22 kW | 37-45 kW | 45-75 kW | 75-90 kW |
| Capacity | / | / | / | / | / | / |
Parameters are for reference only and may change according to the final configuration.
Blade Options and Common Specifications
| Item | Description |
|---|---|
| Blade Styles | Slice type (scissor-cut), flat type, or claw type, selected according to material |
| Cutting Principle | High-speed rotor knives against fixed bed knives |
| Suitable Materials | Unbundled film, PE and PP bottles, PET bottles, plastic caps, plastic baskets, woven bags, small plastic pipe |
| Not Suited For | Bundled or baled plastics and large, bulky parts (use a shredder first) |