PE & PP Film Washing Line

Parent Product

PE & PP Film Washing Line - ToronPR™ PWL PE PP Series

PE PP Film and Woven Bag Washing and Recycling Line

The PE PP film washing line turns dirty post-consumer film and woven polypropylene bags into clean, dewatered flakes ready for further drying or pelletizing. Recyclers, compounders, and film converters use it to reclaim PE film and PP woven packaging that would otherwise end up in landfill. The ToronPR™ PWL PE PP links conveying, metal detection, wet crushing, float washing, friction washing, and centrifugal dewatering into one continuous process. Five standard configurations cover output rates of 300, 500, 1,000, 1,500, and 2,000 kg/h.

Film and bag waste arrives in very different conditions, so Torontech configures each plastic film washing line around the feedstock a plant actually handles. Agricultural mulch film carries soil and sand, while retail and industrial film often carries labels, paper, and adhesive residue. Crusher model, crusher count, and the number of washing stages change to suit the contamination level and target throughput. The result is a film washing and recycling line sized to the job instead of a fixed package.

Water use stays low for a wet process, at 0.5 to 2 m³/h across the range. Pairing the line with a water treatment system lets the plant recirculate process water instead of discharging it. Staffing needs are modest as well, with two to five operators per shift depending on capacity. Clean flakes leave the line ready for a downstream pelletizing extruder, giving converters a consistent recycled resin feedstock.

PE & PP Film Washing Line - ToronPR™ PWL PE PP Series Applications

This plastic recycling washing line serves any operation that collects contaminated polyolefin film or woven bags and needs clean flake for reprocessing.

  • Post-Consumer Film Recycling: washes grocery bags, stretch wrap, and shrink film collected through curbside and retail drop-off programs
  • Agricultural Film Recovery: cleans mulch, greenhouse, and silage film heavily loaded with soil, sand, and plant residue
  • PP Woven Bag Reclamation: processes used woven sacks for cement, fertilizer, animal feed, grain, and sugar as a dedicated PP woven bag washing line
  • Industrial and Commercial Packaging Waste: recovers pallet wrap, liner film, and bag scrap generated at distribution centers and manufacturing plants
  • Plastic Recycling Plants: acts as the front-end washing section of a waste plastic recycling line that feeds pelletizing extruders
  • Film Converters and Compounders: reclaims printed or soiled film scrap and rejected rolls for blending back into production
  • Material Recovery Facilities: washes the film fraction sorted out of mixed municipal and commercial waste streams
PE & PP Film Washing Line

PE & PP Film Washing Line - ToronPR™ PWL PE PP Series Key Features

The line combines protection, washing, and drying stages that Torontech matches to each customer's film type and output target.

  • Integrated Multi-Stage Process: conveying, crushing, washing, and dewatering run as one connected line, so material moves through every stage without manual handling
  • Blade Protection at the Infeed: metal detection ahead of the crusher flags tramp metal for removal before it can chip or dull blades
  • Crusher Sized to Throughput: crusher model and crusher count are selected to match the target capacity of each installation
  • Recycled Water Operation: an optional water treatment system lets the line reuse process water and cut fresh water demand
  • Customizable Unit Configuration: washing and crushing units can be added or changed to suit film condition and contamination level
  • Five Capacity Options: standard configurations span 300 kg/h through 2,000 kg/h of output
  • Modest Staffing Requirement: two to five workers per shift operate the line, depending on capacity

Main Machine Units

Each ToronPR™ PWL PE PP line is customized, so the exact unit list varies by project. The six units below form the core of every configuration.

Belt Conveyor with Metal Detector

The belt conveyor carries loose film and opened bags up an inclined path and delivers them to the crusher at a controlled rate. A metal detector mounted along the conveyor scans the material stream before it enters the cutting chamber. When the detector picks up a nail, wire, or other tramp metal, the operator can pull it out before it reaches the rotor. This protects the crusher blades against chipping and wear, which keeps cutting quality consistent and avoids costly blade changes.

PE & PP Film Washing Line
PE & PP Film Washing Line

Wet Granulator/Crusher (with Water)

The crusher cuts film and bags into small, uniform flakes that the washing stages can handle efficiently. Water flows into the cutting chamber throughout the process, cooling the blades and rinsing off loose dirt as the material breaks down. This wet crushing step gives the line a head start on cleaning and keeps dust out of the plant. Torontech selects the crusher model, and the number of crushers, according to the required output capacity of each line.

Screw Feeder

The screw feeder transfers flakes between processing stages, lifting wet material out of one unit and feeding it into the next. A rotating screw inside an inclined housing moves the flakes at a steady, metered rate. Excess water drains back down the incline as the material climbs, so less dirty water carries over into the following stage. This even feed keeps the downstream washers and dewatering machine consistently loaded, which helps the whole line hold its rated throughput.

PE & PP Film Washing Line
PE & PP Film Washing Line

Floating Washer

The floating washer separates contaminants by density in a long water tank. PE and PP flakes float on the surface, while a series of washing rollers pushes them under the water to scrub and soak them. Sand, soil, stones, and other heavy impurities sink and collect at the bottom of the tank. Operators drain this sediment out periodically, and the cleaned flakes travel along the surface toward the discharge end.

High-Speed Friction Washer

The high-speed friction washer is the main scrubbing stage for plastic film, removing contamination that soaking alone cannot release. A paddle shaft rotates at high speed inside a screen mesh housing while high-pressure water sprays the material. The paddles drive flakes against each other and against the screen, stripping off paper labels, glue, and fine dirt. These contaminants exit through the screen mesh with the wash water, and the cleaned flakes move on to dewatering.

PE & PP Film Washing Line
PE & PP Film Washing Line

High-Speed Dewatering Machine

The high-speed dewatering machine removes surface water before the flakes leave the line. A rotor spins at high speed inside a cylindrical screen, creating strong centrifugal force on the wet material. That force throws most of the surface water outward through the screen mesh around the rotor. PE and PP absorb very little water, so this final plastic film dewatering stage leaves flakes with low moisture and ready for further drying or pelletizing.

Theory and Method

Sink-float density separation drives the cleaning process. Polyethylene and polypropylene have densities of roughly 0.90 to 0.96 g/cm³, so they float in water at about 1.0 g/cm³. Sand, soil, glass, metal fines, and most heavier polymers sink. The floating washer uses this gap: rotating rollers push the flakes under the surface to scrub them, then release them to rise again while dirt settles to the tank bottom for draining.

Friction washing removes contamination that density alone leaves behind. A paddle shaft spins at high speed inside a perforated screen while high-pressure water sprays the material. The paddles drive flakes against each other and against the screen, and that abrasion strips paper, label fibers, glue, and fine dirt off the film surface. Loosened contaminants pass through the screen mesh with the water, while the cleaned flakes continue to the next stage.

Wet crushing and centrifugal dewatering frame the washing stages. Water added at the crusher cools the blades, flushes loose dirt, and starts the cleaning before flakes reach the first tank. At the end of the line, the dewatering rotor spins fast enough to generate strong centrifugal force, which throws surface water outward through a surrounding screen. Because PE and PP absorb almost no water, removing this surface film mechanically leaves flakes ready for further drying or pelletizing.

PE & PP Film Washing Line - ToronPR™ PWL PE PP Series Technical Specifications

Main Technical Parameters

ParameterToronPR™ PWL PE PP 300ToronPR™ PWL PE PP  500ToronPR™ PWL PE PP  1000ToronPR™ PWL PE PP  1500ToronPR™ PWL PE PP  2000
Output Capacity300 kg/h500 kg/h1,000 kg/h1,500 kg/h2,000 kg/h
Total Installed Power130 kW200 kW300 kW420 kW500 kW
Floor Area Required240 m²360 m²450 m²520 m²650 m²
Labor Required2-3 workers/shift2-3 workers/shift3-4 workers/shift3-4 workers/shift4-5 workers/shift
Water Consumption0.5 m³/h0.7 m³/h1.0 m³/h1.5 m³/h2.0 m³/h
Process WaterRecyclable with water treatment systemRecyclable with water treatment systemRecyclable with water treatment systemRecyclable with water treatment systemRecyclable with water treatment system

Parameters are for reference only and may change according to the final line configuration.

Request Quote

Back to Main Page