Optical Fiber Cable Tensile Testing Machine - Indoor Cable
Parent Product
Product Categories
IEC-60794-1-2 Method E1
Torontech's Optical Fiber Cable Tensile Testing Machine - Indoor Cable (for Bow Type Cables) series of Optical Cable Testing machines are designed specifically for indoor optical cables to apply tensile force on indoor optical cables; it also has an extensometer to measure the cable elongation for optical cable under tension.
In Optical Fiber Cable Tensile Testing Machine - Indoor Cable sample is wound over the approximate sized sheave, pulled at a specific rate until a pre-determined tension is applied. The test cable is further laid to rest under tension as per detail specifications, and then the attenuation and fiber length are measured.
- Indoor Telecommunication Cables – Evaluates tensile performance of bow-type and other indoor fiber optic cables during installation.
- FTTH and FTTx Networks – Confirms reliability of indoor drop cables used in fiber-to-the-home and office connections.
- Building and Infrastructure Wiring – Tests cable strength when routed through conduits, risers, or tight bends in indoor settings.
- Data Centers and IT Facilities – Ensures cables can handle mechanical stress without signal loss in high-density installations.
- Elevator and Indoor Transport Systems – Validates performance of cables subjected to vertical pulling within confined shafts.
- Product Development and Quality Assurance – Provides standardized IEC 60794-1-2 E1 testing for manufacturers and laboratories to certify compliance.
| Model | TTOFCT-ID (Bow) | |||
| Load capacity | 2KN (other loads are available upon request) | |||
| Accuracy class | ±0.5% - ISO 7500-1 | |||
| Crosshead travel | 500 mm | |||
| Loading speed | 0.2 - 500 mm/min | |||
| Movable sheave | Ø250mm | |||
| Load measurement accuracy | ±0.5% of reading to 1/100 of load weighing system capacity meets or exceeds the ISO 7500-1 | |||
| Strain measurement accuracy: | ±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4. | |||
| Speed accuracy: | Set speed <0.05% Max. speed: ±1% Set speed ≥0.05% Max. speed:±0.5% | |||
| Position measurement accuracy: | ±0.01% of reading or 0.0001 mm, whichever is greater | |||
| Deformation measuring accuracy | ±0.5% | |||
| Displacement measuring accuracy | ±0.3% | |||
| Power supply | Please specify voltage and frequency before placing the order. Power must be free of spikes and surges exceeding 10% of the nominal voltage) | |||
| Operating temperature | 0 to +38°C (+32 to +100°F) | |||
| Humidity range | 10% to 90% non-condensing | |||
| Storage temperature | -40 to +66°C (-40 to +150°F) | |||
| Operational space (WxDxH) | (Flexible) x 1500 x 1200 | |||
| Dimension/Weight | Machine | Shipping Package | ||
| Dimensions (LxWxH) mm | Net Weight Kg | Dimensions (LxWxH) mm | Gross Weight Kg | |
| Load frame | 1800 x 400 x 1200 | 140 | 1860 x 660 x 1440 | 160 |
| Pulleys | 1140 x 400 x 1200 | 90 | 1300 x 570 x 1440 | 110 |
| Other Parts | 1500 x 500 x 800 | 40 | 1600 x 600 x 1000 | 60 |
| PC + Table | 800 x 800 x 900 | 80 | 900 x 900 x 1100 | 110 |
