Protective Clothing Blood Penetration Resistance Tester
Protective Clothing Blood Penetration Resistance Tester ToronPC™ BPRT evaluates how well protective clothing materials resist penetration by synthetic blood.
Standards
ASTM F903: Specifies the test method to measure the resistance of protective clothing materials to penetration by liquids (chemicals) under conditions of continuous liquid contact.
ISO 16603: Determines the resistance of protective clothing materials to penetration by blood and body fluids using a synthetic blood simulant under specified conditions of pressure.
IS 16545: An Indian Standard derived from ISO 16603 that establishes the procedure for evaluating the resistance of PPE materials to synthetic blood penetration.
YY/T 0700: A Chinese pharmaceutical industry standard that specifies the test method for measuring the resistance of protective clothing to penetration by blood and body fluids.
ASTM F1670: Evaluates the resistance of materials used in protective clothing to penetration by synthetic blood under constant liquid contact, often used as a precursor to viral testing.
ASTM F1671/F1671M: Measures the resistance of materials to penetration by bloodborne pathogens using the Phi-X174 bacteriophage as a test system under continuous liquid contact.
ISO 16604: Determines the resistance of protective clothing materials to penetration by bloodborne pathogens using a viral challenge (Phi-X174 bacteriophage) and a specific pressurized test apparatus.
IS 16546: An Indian Standard equivalent to ISO 16604 that outlines the test method for determining the resistance of protective clothing materials to penetration by bloodborne pathogens.
GB 19082: A Chinese national standard that outlines the technical requirements, test methods, and classification for single-use medical primary protective clothing.
The Protective Clothing Blood Penetration Resistance Tester ToronPC™ BPRT offers advanced functionality and precise testing capabilities:
- Available with one or four working positions, allowing simultaneous testing of up to four specimens.
- Features single-chip microcomputer control for automatic timing, operation, and alerts upon test completion.
- Equipped with a mechanical pressure meter for easy verification.
- Includes a touchscreen interface (HMI) for real-time monitoring of pressurized pressure.
- Each working position has an independent pressure monitoring display.
- Utilizes a programmable throttle valve to ensure the pressurization rate does not exceed 3.5 kPa/s.
- Specimen installation is simplified with a 13.6 N·m ratchet wrench, offering precise and controllable torque.
| Model | ToronPC™ BPRT-1 | ToronPC™ BPRT1-4 |
|---|---|---|
| Working position | 1 | 4 |
| Specimen dimension | 75mm x 75mm Compressed cross-section diameter: Ф 57mm | |
| Retardation mesh | 304 Stainless Steel Open space ≥ 50% Curve ≤ 5mm at 14 kPa | |
| Air supply | Compression air | |
| Fixture torque | 13.6 N·m | |
| Air supply | ≥ 0.4 kg/cm2 | |
| Standard accessory | Digital Torque Wrench, 1 set | |