Plastic Film Pelletizing Line - ToronPR™ PPL F Series
PE PP Film and Woven Bag Pelletizing Line with Cutter Compactor and Single Screw Extruder
The plastic film pelletizing line converts PE and PP film and woven bags into dense, uniform pellets ready for blown film, injection molding, or compounding. Recyclers and film converters use it to turn washed flake, production scrap, and bulky film rolls into a resin they can sell or reuse. The ToronPR™ PPL F combines a cutter compactor, single screw extruder with vacuum degassing, hydraulic screen changer, and pellet cutting unit in one line. Six models cover output rates of 150 to 1,000 kg/h.
The cutter compactor lets operators feed large film pieces and whole woven bags directly, without pre-shredding or a separate agglomerator. Buyers can choose single-stage or double-stage extrusion, depending on how much filtration and degassing their feedstock needs. Water ring hot cutting and strand pelletizing are both available, along with several screen changer designs. This flexibility lets each film pelletizing line match the material condition and the pellet quality a plant has to deliver.
Plastic Film Pelletizing Line - ToronPR™ PPL F Series Applications
This plastic recycling machine serves operations that need to turn flexible polyolefin waste back into usable resin.
- Post-Consumer Film Recycling: pelletizes washed flake produced by a film washing line into resin for new film or molded goods
- Film Production Scrap: reprocesses edge trim, startup waste, and rejected rolls at blown and cast film plants
- PP Woven Bag and Raffia Recycling: converts woven sacks, FIBC fabric, and raffia tape waste into PP pellets
- Agricultural Film Recovery: pelletizes cleaned mulch, greenhouse, and silage film for lower-grade film and molded products
- Packaging Converters: recovers printed bag and pouch scrap, with vacuum degassing to draw off ink residues
- Compounding Operations: produces consistent recycled PE and PP base resin for blending with virgin material and additives

Plastic Film Pelletizing Line - ToronPR™ PPL F Series Key Features
The line handles bulky film directly and gives buyers configuration choices at every major stage.
- Direct Feeding of Bulky Film: the cutter compactor accepts large film pieces and whole woven bags, removing the need for separate shredding or agglomeration
- Friction Drying in the Compactor: frictional heat dries and preheats the material, lowering the moisture load on the extruder
- Vacuum Degassing: the extruder vents moisture, oil, and ink volatiles, which reduces bubbles and voids in the finished pellets
- Non-Stop Screen Changes: a double-station hydraulic screen changer lets operators swap screens without stopping the line
- Single or Double-Stage Extrusion: choose one extruder for clean feedstock or two for heavily printed or contaminated film
- Choice of Pelletizing Method: water ring pelletizer suits most PE and PP grades, and strand pelletizing is available as an alternative
- Selectable Filter Designs: plate, piston, self-cleaning, and back-flush screen changers match different contamination levels
- Closed-Loop Cooling Water: water collected under the dewatering machine returns to the water ring cutter for reuse
- Six Capacity Options: models span 150 kg/h through 1,000 kg/h of pellet output
Main Machine Units
Each ToronPR™ PPL F line is configured to the customer's material and output, so the exact unit list varies by project. The six units below form the core of a typical water ring configuration.
Theory and Method
Film is too light and bulky to feed a screw directly, so the cutter compactor densifies it first. A rotor with blades spins at the base of a large drum, cutting the film and generating friction heat. The material warms, dries, shrinks, and softens just short of melting, forming a dense, partly plasticized mass. Rotor motion then forces this material tangentially into the extruder throat, which gives a steady, high-density feed.
The extruder screw then conveys, compresses, and melts the polymer through shear and barrel heating. A vacuum degassing zone follows, where the screw geometry drops the melt pressure. Moisture, ink solvents, and other volatiles flash out of the melt at low pressure, and a vacuum pump draws them away. A hydraulic screen changer then filters solid impurities out of the melt before it reaches the die.
Water ring hot cutting turns the filtered melt into pellets right at the die face. Rotating knives slice the melt strands as they exit the die holes, and centrifugal force throws the hot pellets into a spinning ring of water. The water quenches and carries the pellets away, then a dewatering machine strips off surface moisture. A double-stage line adds a second extruder, rated below the first stage at every model size.
Plastic Film Pelletizing Line - ToronPR™ PPL F Series Technical Specifications
| Parameter | ToronPR™ PPL F 85/85 | ToronPR™ PPL F 100/100 | ToronPR™ PPL F 120/120 | ToronPR™ PPL F 130/130 | ToronPR™ PPL F 160/160 | ToronPR™ PPL F 180/200 |
|---|---|---|---|---|---|---|
| Output Capacity | 150-200 kg/h | 250-350 kg/h | 350-450 kg/h | 500-600 kg/h | 700-800 kg/h | 900-1,000 kg/h |
| Compactor Motor Power | 37 kW | 55 kW | 75 kW | 90 kW | 110 kW | 132 kW |
| First Stage Extruder Motor Power | 55 kW | 90 kW | 110 kW | 132 kW | 160 kW | 200 kW |
| Second Stage Extruder Motor Power | 15 kW | 30 kW | 45 kW | 55 kW | 75 kW | 90 kW |
Second stage motor power applies to double-stage lines only. Parameters are for reference only and may change according to the final line configuration.
Configuration Options
| Item | Available Options |
|---|---|
| Extrusion Stages | Single-stage or double-stage |
| Pelletizing Method | Water ring hot cutting or strand pelletizing |
| Screen Changer Type | Plate type, piston type, self-cleaning type, back-flush type |
| Screen Changer Station | Double-station hydraulic, for non-stop screen changes |
| Degassing | Vacuum degassing on the extruder barrel |
| Feed Material | PE and PP film, PP woven bags |
| Output | PE and PP pellets |





