Single Shaft Shredder - ToronPR™ SSS Series
Industrial Single Shaft Plastic Shredder with Hydraulic Ram and PLC Control
The single shaft plastic shredder reduces bulky plastic waste, purgings, pipe, and containers into uniform pieces ready for granulating, washing, or direct reprocessing. Recyclers, molders, and waste handlers use it where a granulator alone cannot take oversized or thick-walled parts. The ToronPR™ SSS pairs a low-speed, high-torque rotor with a hydraulic ram that presses material steadily against the knives. Nine models cover throughput of 100 kg/h through 5,000 kg/h, with feed openings up to 2,100 × 2,000 mm.
A PLC controls the hydraulic ram and the rotor direction. Operators can adjust ram speed to suit each material, and the rotor reverses automatically to clear jams without manual intervention. Square knives with four cutting edges rotate for reuse when one edge wears, which cuts blade costs and downtime. Three rotor designs are available, so each industrial plastic shredder can match the material it will see most.
Beyond plastic, the shredder also handles wood, paper, cable, and light-gauge metal such as aluminum and copper. That range lets one machine serve mixed production scrap or several waste streams across a site. Smaller models suit in-plant scrap at a molding press, while the larger models take bales and bulk waste at a recycling facility. Output size depends on the configuration and material, so Torontech matches each unit to the downstream process it will feed.
Single Shaft Shredder - ToronPR™ SSS Series Applications

This plastic recycling shredder fits operations that need to break down large, tough, or irregular material before further processing.
- Plastic Recycling Plants: pre-shredding bales, crates, drums, and containers ahead of a granulator or washing line
- Injection and Blow Molding Plants: reducing purgings, start-up lumps, and rejected parts that are too large for a granulator
- Pipe and Profile Producers: cutting long PE, PP, and PVC pipe and profile scrap into manageable pieces
- Film and Fiber Recycling: shredding film rolls, nylon, and fiber waste that wraps around high-speed cutters
- Wood and Pallet Recycling: reducing pallets, offcuts, and furniture waste for biomass or particleboard
- Paper and Document Destruction: shredding paper rolls, cores, and baled paper waste
- Cable and Light Metal Scrap: pre-shredding cable, aluminum, and copper scrap ahead of separation

Single Shaft Shredder - ToronPR™ SSS Series Key Features
The shredder combines controlled feeding, reusable knives, and automatic jam handling for steady, low-maintenance operation.
- Four-Edge Square Knives: each knife rotates to a fresh cutting edge when one wears, extending knife life and simplifying changes
- PLC-Controlled Hydraulic Ram: the ram pushes material into the rotor at a programmed rate, with speed adjustable for each material
- Automatic Forward and Reverse: the PLC reverses the rotor to clear jams, reducing operator intervention and stoppages
- Three Rotor Designs: choose the rotor construction that best suits the hardness and contamination of the feed material
- Low-Speed, High-Torque Cutting: slow rotor speed cuts tough material with low noise, low dust, and modest energy use
- Wide Material Range: handles plastic, wood, paper, cable, and light metals such as aluminum and copper
- Large Feed Openings: feed openings reach 2,100 × 2,000 mm on the largest models, accepting bulky parts and bales
- Nine Capacity Options: models span 100 kg/h through 5,000 kg/h, with motor power up to 220 kW
- Hardened Tool Steel Knives: Square knives rotate to a fresh edge for easy replacement
Theory and Method
Single shaft shredding reduces material through low-speed shearing. A horizontal rotor carries rows of knives that pass close to fixed counter knives mounted in the frame. As the rotor turns, each rotating knife traps material against a fixed knife and shears off a piece. The rotor turns slowly but with high torque, so it cuts thick, tough parts while generating little heat, dust, or noise.
The hydraulic ram supplies the feed force. It pushes material horizontally into the rotor at a controlled speed, holding steady pressure so the knives bite continuously. Light material such as film would otherwise bounce on top of the rotor, while heavy lumps would stall it without controlled feeding. The PLC adjusts ram travel to the cutting load, keeping the rotor working near its optimum torque.
Single Shaft Shredder - ToronPR™ SSS Series Technical Specifications
Models 450 to 1000
| Parameter | ToronPR™ SSS 450 | ToronPR™ SSS 600 | ToronPR™ SSS 700 | ToronPR™ SSS 800 | ToronPR™ SSS 1000 |
|---|---|---|---|---|---|
| Capacity | 100-150 kg/h | 300-500 kg/h | 400-500 kg/h | 400-700 kg/h | 600-1,000 kg/h |
| Motor Power | 15 kW | 22 kW | 37 kW | 45 kW | 55 kW |
| Hydraulic Power | 1.1 kW | 2.2 kW | 3 kW | 3 kW | 5.5 kW |
| Rotor Diameter | 220 mm | 280 mm | 400 mm | 400 mm | 400 mm |
| Rotor Speed | / | 75-80 rpm | 75-80 rpm | 75-80 rpm | 75-80 rpm |
| Rotary Blades | 22 pcs | 26+4 pcs | 30 pcs | 34+4 pcs | 46 pcs |
| Fixed Blades | 1 pc | 2 pcs | 2 pcs | 2 pcs | 2 pcs |
| Chamber Size | 450 × 400 mm | 650 × 600 mm | 650 × 700 mm | 800 × 800 mm | 1,000 × 1,000 mm |
| Feed Opening Size | 800 × 750 mm | 1,250 × 1,070 mm | 1,250 × 1,170 mm | 1,600 × 1,200 mm | 1,600 × 1,500 mm |
| Discharge Opening Size (H × W) | 650 × 410 mm | 650 × 620 mm | 650 × 700 mm | 800 × 810 mm | 900 × 1,050 mm |
| Hydraulic Cylinder Stroke | / | 600 mm | 700 mm | 800 mm | 1,000 mm |
| Dimensions (L × W × H) | 1,850 × 1,280 × 1,700 mm | 2,290 × 1,560 × 1,840 mm | 2,300 × 1,600 × 1,840 mm | 2,750 × 1,800 × 2,190 mm | 3,150 × 2,100 × 2,300 mm |
| Weight | 1,200 kg | 2,300 kg | 3,200 kg | 3,800 kg | 4,500 kg |
Models 1200 to 2000
| Parameter | ToronPR™ SSS 1200 | ToronPR™ SSS 1500 | ToronPR™ SSS 1800 | ToronPR™ SSS 2000 |
|---|---|---|---|---|
| Capacity | 800-1,200 kg/h | 1,500-2,000 kg/h | 2,000-3,000 kg/h | 3,000-5,000 kg/h |
| Motor Power | 75 kW | 90-110 kW | 110-180 kW | 180-220 kW |
| Hydraulic Power | 7.5 kW | 11 kW | 11 kW | 15 kW |
| Rotor Diameter | 400 mm | 400 mm | 500 mm | 600 mm |
| Rotor Speed | 75 rpm | 75 rpm | - | - |
| Rotary Blades | 68 pcs | 78 pcs | 98 pcs | 110 pcs |
| Fixed Blades | 2 pcs | 3 pcs | 3 pcs | 4 pcs |
| Chamber Size | 1,200 × 1,100 mm | 1,500 × 1,100 mm | 1,800 × 1,300 mm | 2,000 × 1,500 mm |
| Feed Opening Size | 1,800 × 1,600 mm | 2,100 × 2,000 mm | 2,100 × 2,000 mm | 2,100 × 2,000 mm |
| Discharge Opening Size (H × W) | 900 × 1,250 mm | 900 × 1,500 mm | 1,000 × 1,800 mm | 1,200 × 2,000 mm |
| Hydraulic Cylinder Stroke | 1,200 mm | 1,500 mm | / | / |
| Dimensions (L × W × H) | 3,250 × 2,200 × 2,300 mm | 3,500 × 2,500 × 2,400 mm | 4,000 × 2,800 × 2,500 mm | 4,500 × 3,200 × 2,600 mm |
| Weight | 6,500 kg | 8,000 kg | 11,000 kg | 15,000 kg |
Parameters are for reference only and may change according to the final configuration.
Common Specifications and Options
| Item | Description |
|---|---|
| Rotor Designs | Detachable (bolted) knife holders, welded knife holders, or integrated rotor |
| Rotary Knife Type | Square knives with four usable cutting edges |
| Knife Material | D2 (SKD11) tool steel |
| Knife Hardness | HRC 55 to 60, adjusted according to material |
| Feeding System | Horizontal hydraulic ram with PLC-controlled, adjustable speed |
| Control System | PLC with automatic forward and reverse rotor operation |
| Feed Hopper | Hopper design configurable to customer requirements |
| Suitable Materials | Plastic, wood, paper, cable, light metals such as aluminum and copper |