Plastic Pipe Shredder - ToronPR™ S PP Series
Single Shaft Shredder for Plastic Pipe, Whole Rolls and Industrial Paper Tubes
The plastic pipe shredder reduces long, large-diameter pipe into pieces ready for granulating, washing, or pelletizing. Pipe producer, recyclers, and utility contractors use it to process HDPE, PVC, and PP pipe scrap, rejected production runs, and pipe removed from service. The ToronPR™ S PP accepts pipe sections of 1 to 2 m directly, so operators skip the time-consuming step of cutting pipe into short pieces first. Four models handle pipe diameters up to 350, 630, 800, and 1,000 mm.
A hydraulic ram pushes pipe into a high-torque rotor, which shears thick pipe walls at low speed. A PLC controls the machine and reverses the rotor automatically to clear jams, keeping operation simple for the crew. The reducer mounts directly on the frame, which shields the gearbox from the vibration that heavy pipe cutting generates. Throughput ranges up to 1,200 kg/h, depending on model and material.
The same machine also handles whole rolls of material and industrial paper tubes. That versatility suits converting plants that generate roll cores, tube waste, and pipe scrap on the same site. Two rotor designs let buyers match the cutting system to their material. Torontech matches each model to the pipe size, throughput, and downstream process it will feed.
Plastic Pipe Shredder - ToronPR™ S PP Series Applications

This pipe shredder serves operations that generate or collect long, thick-walled cylindrical waste.
- Pipe and Profile Manufacturing: shredding start-up scrap, off-spec lengths, and rejected pipe for in-house regrinding
- Pipe Recycling Plants/PVC Pipe Shredder,: reducing post-use HDPE, PVC, and PP pipe ahead of granulators and pelletizing lines
- Water and Gas Utilities: processing large-diameter water main and gas distribution pipe removed during replacement projects
- Construction and Demolition: shredding drainage, sewer, and conduit pipe recovered from job sites
- Agricultural Irrigation: reducing irrigation pipe and large hose taken out of service
- Film and Paper Converting: shredding whole rolls, roll cores, and industrial paper tubes left over from production
- Plastic Recycling Plants: handling pipe alongside other bulky rigid plastics at the head of a recycling line

Plastic Pipe Shredder - ToronPR™ S PP Series Key Features
The shredder is built around one job: turning long, thick-walled pipe into manageable pieces without pre-cutting.
- Direct Feeding of Long Pipe: accepts 1 to 2 m pipe sections without cutting them down first, saving labor and handling
- Large Pipe Capacity: models handle pipe diameters up to 350, 630, 800, or 1,000 mm
- Frame-Mounted Reducer: the gearbox sits on the frame, shielding it from working vibration and delivering more stable torque output
- Hydraulic Ram Feeding: the ram pushes pipe steadily into the rotor so the knives cut continuously
- Automatic Forward and Reverse: the PLC reverses the rotor to clear jams, reducing operator intervention and stoppages
- Two Rotor Designs: choose a welded knife-holder rotor or an integrated rotor to suit the material
- Four-Edge Square Knives: each knives that rotate to a fresh cutting edge when one wears
- Multi-Material Use: also processes whole rolls and industrial paper tubes
Theory and Method
Single shaft shredding reduces material through low-speed shearing. A horizontal rotor carries rows of knives that pass close to fixed counter knives mounted in the frame. As the rotor turns, each rotating knife traps material against a fixed knife and shears off a piece. Slow, high-torque rotation cuts thick pipe walls while generating little heat, dust, or noise.
Pipe presents a feeding challenge because of its length and rounded shape. A long section tends to roll, bridge across a hopper, or ride on top of the rotor without engaging the knives. The hydraulic ram solves this by pushing pipe steadily into the cutting zone, so the knives bite progressively along the pipe end. This lets the machine accept 1 to 2 m lengths that would otherwise need pre-cutting.
Heavy pipe produces large, uneven shock loads as each knife strikes a thick wall. This series fixes the reducer to the machine frame, which lets the frame absorb vibration and keeps gear loading more even. When the motor load spikes, the PLC reverses the rotor briefly to free the material, then resumes forward cutting. Square knives present four cutting edges, so operators rotate each knife when an edge dulls.
Plastic Pipe Shredder - ToronPR™ S PP Series Technical Specifications
| Parameter | ToronPR™ S PP 600 | ToronPR™ S PP 800 | ToronPR™ S PP 1000 | ToronPR™ S PP 1200 |
|---|---|---|---|---|
| Capacity | 300 kg/h | 400-700 kg/h | 600-800 kg/h | 800-1,200 kg/h |
| Maximum Pipe Diameter | 350 mm | 630 mm | 800 mm | 1,000 mm |
| Motor Power | 22 / 30 kW | 45 / 55 kW | 55 / 75 kW | 75 kW |
| Hydraulic Power | 2.2 kW | 3 kW | 5.5 kW | 7.5 kW |
| Rotor Diameter | 280 mm | 420 mm | 420 mm | 420 mm |
| Rotor Speed | 75-80 rpm | 75-80 rpm | 75-80 rpm | 75 rpm |
| Rotary Knives | 26+4 pcs | 33 pcs | 42 pcs | 50 pcs |
| Fixed Blades | 2 pcs | 2 pcs | 2 pcs | 2 pcs |
| Chamber Size | 650 × 600 mm | 800 × 800 mm | 1,000 × 1,000 mm | 1,200 × 1,100 mm |
| Feed Opening Size | 480 × 480 mm | 680 × 680 mm | 800 × 800 mm | 1,000 × 1,000 mm |
| Discharge Opening Size (H × W) | 650 × 620 mm | 800 × 840 mm | 800 × 1,050 mm | 800 × 1,200 mm |
| Fixed Counter Knives | 600 mm | 800 mm | 1,000 mm | 1,200 mm |
| Dimensions (L × W × H) | 2,650 × 1,560 × 1,950 mm | 3,400 × 2,100 × 2,150 mm | 3,600 × 2,300 × 2,200 mm | 3,900 × 2,500 × 2,300 mm |
| Weight | 2,850 kg | 5,000 kg | 5,500 kg | 8,200 kg |
Motor power values separated by a slash are alternative motor options. Parameters are for reference only and may change according to the final configuration.
Common Specifications and Options
| Item | Description |
|---|---|
| Feed Length | Pipe sections of 1 to 2 m without pre-cutting |
| Rotor Designs | Welded knife-holder rotor or integrated rotor |
| Rotary Knife Type | Square knives with four usable cutting edges |
| Knife Material | D2 (SKD11) tool steel |
| Knife Hardness | HRC 55 to 60, adjusted according to material |
| Drive Mounting | Reducer fixed on the machine frame |
| Feeding System | Horizontal hydraulic ram |
| Control System | PLC with automatic forward and reverse rotor operation |
| Suitable Materials | Plastic pipe, whole roll materials, industrial paper tubes |