Heavy Duty Single Shaft Shredder

Parent Product

Heavy Duty Single Shaft Shredder - ToronPR™ SSS HV Series

Heavy Duty Industrial Single Shaft Shredder for Thick Wall Plastics and Mixed Waste

The heavy duty plastic shredder breaks down thick-walled plastics, large purgings, drums, and mixed waste that strain lighter shredders. Recyclers, molders, and waste processors use it as the first size-reduction step for tough, bulky, or irregular material. The ToronPR™ SSS HV combines a high-torque rotor, a PLC-controlled hydraulic ram, and a reducer mounted directly on the machine frame. Seven models cover throughput of 300 kg/h through 5,000 kg/h, with feed openings up to 2,100 × 2,000 mm.

Mounting the reducer on the frame keeps rotor shock and vibration away from the gearbox, so torque output stays steady under heavy, uneven loads. Larger rotor diameters and heavier frames give the series the mass and stiffness that dense material demands. A PLC adjusts ram speed for each material and reverses the rotor automatically to clear jams. Square knives with four cutting edges rotate for reuse, which lowers blade cost and shortens maintenance stops.

Three rotor designs let buyers match the cutting system to their material. The machine also handles wood, paper, cable, and light metals such as aluminum and copper. That range makes one heavy duty industrial shredder suitable for sites with several waste streams. Torontech matches each model to the material, throughput, and downstream process it will feed.

Heavy Duty Single Shaft Shredder - ToronPR™ SSS HV Series Applications

Heavy Duty Single Shaft Shredder

This industrial plastic shredder suits operations where material is too thick, heavy, or irregular for a standard shredder or granulator.

  • Thick-Wall Plastic Recycling: pre-shredding pipe, drums, IBC tote, pallets, and heavy crates ahead of granulating or washing
  • Injection and Blow Molding Plants: reducing large purgings, start-up lumps, and rejected parts before regrinding
  • Mixed Waste Processing: first-stage size reduction of commercial and industrial waste before sorting or fuel production
  • Wood and Pallet Recycling: shredding pallets, beams, and furniture waste for biomass or board production
  • Paper and Fiber Waste: reducing paper rolls, cores, and baled fiber waste
  • Cable and Light Metal Scrap: pre-shredding cable, aluminum, and copper scrap ahead of separation equipment
  • Plastic Recycling Plants: breaking down bales and bulky post-consumer plastics at the head of a recycling line

Heavy Duty Single Shaft Shredder - ToronPR™ SSS HV Series Key Features

The series builds on the standard single shaft design with a stiffer drive mounting and heavier construction for demanding material.

  • Frame-Mounted Reducer: the gearbox sits on the frame, shielding it from working vibration and delivering more stable torque output
  • Heavy-Duty Construction: larger rotors and heavier frames suit thick-walled plastics, dense lumps, and mixed waste
  • Four-Edge Square Knives: each knife rotates to a fresh cutting edge when one wears, extending knife life and simplifying changes
  • PLC-Controlled Hydraulic Ram: the ram pushes material into the rotor at a programmed rate, with speed adjustable for each material
  • Automatic Forward and Reverse: the PLC reverses the rotor to clear jams, reducing operator intervention and stoppages
  • Three Rotor Designs: choose the rotor construction that best suits the hardness and contamination of the feed material
  • Wide Material Range: handles plastic, wood, paper, cable, and light metals such as aluminum and copper
  • Large Feed Openings: feed openings reach 2,100 × 2,000 mm on the largest models, accepting bulky parts and bales
  • Seven Capacity Options: models span 300 kg/h through 5,000 kg/h, with motor power up to 220 kW

Theory and Method

Single shaft plastics shredder reduces material through low-speed shearing. A horizontal rotor carries rows of knives that pass close to fixed counter knives mounted in the frame. As the rotor turns, each rotating knife traps material against a fixed knife and shears off a piece. The slow, high-torque rotation cuts thick and tough parts without the high rotor speed a granulator needs.

Heavy material produces large, uneven shock loads as the knives bite. On many shredders the reducer hangs on the rotor shaft, so those shocks pass straight into the gearbox. This series fixes the reducer to the machine frame instead, which lets the frame absorb vibration and keeps gear loading more even. The result is steadier torque at the rotor and less wear on the drive train.

The hydraulic ram supplies the feed force. It pushes material horizontally into the rotor at a programmed speed, holding steady pressure so the knives cut continuously. When the motor load spikes, the PLC reverses the rotor briefly to free the material, then resumes forward cutting. Square knives present four cutting edges, so operators rotate each knife a quarter turn when an edge dulls instead of replacing it.

Heavy Duty Single Shaft Shredder - ToronPR™ SSS HV Series Technical Specifications

Models 600 to 1200

ParameterToronPR™ SSS HV 600ToronPR™ SSS HV 800ToronPR™ SSS HV 1000ToronPR™ SSS HV 1200
Capacity300-500 kg/h400-700 kg/h600-1,000 kg/h800-1,200 kg/h
Motor Power22 / 30 kW45 / 55 kW55 / 75 kW75 kW
Hydraulic Power2.2 kW3 kW5.5 kW7.5 kW
Rotor Diameter280 mm420 mm420 mm420 mm
Rotary Blades30 pcs33 pcs42 pcs50 pcs
Fixed Blades2 pcs2 pcs2 pcs2 pcs
Chamber Size650 × 600 mm800 × 800 mm1,000 × 1,000 mm1,200 × 1,100 mm
Feed Opening Size1,250 × 1,070 mm1,600 × 1,200 mm1,600 × 1,500 mm1,800 × 1,600 mm
Discharge Opening Size (H × W)650 × 620 mm800 × 840 mm900 × 1,050 mm900 × 1,250 mm
Dimensions (L × W × H)2,300 × 1,850 × 1,840 mm2,750 × 2,100 × 2,190 mm3,150 × 2,500 × 2,200 mm3,500 × 2,750 × 2,300 mm
Weight2,850 kg4,500 kg5,100 kg7,500 kg

Models 1500 to 2000

ParameterToronPR™ SSS HV 1500ToronPR™ SSS HV 1800ToronPR™ SSS HV 2000
Capacity1,500-2,000 kg/h2,000-3,000 kg/h3,000-5,000 kg/h
Motor Power90-110 kW160 kW180-220 kW
Hydraulic Power11 kW11 kW15 kW
Rotor Diameter420 mm500 mm600 mm
Rotary Blades60 pcs100 pcs140 pcs
Fixed Blades3 pcs3 pcs4 pcs
Chamber Size1,500 × 1,100 mm1,800 × 1,300 mm2,000 × 1,500 mm
Feed Opening Size2,100 × 2,000 mm2,100 × 2,000 mm2,100 × 2,000 mm
Discharge Opening Size (H × W)900 × 1,500 mm1,000 × 1,800 mm1,200 × 2,000 mm
Dimensions (L × W × H)3,750 × 2,500 × 2,400 mm4,300 × 3,100 × 2,500 mm4,750 × 3,400 × 2,600 mm
Weight9,500 kg12,500 kg18,000 kg

Motor power values separated by a slash are alternative motor options. Parameters are for reference only and may change according to the final configuration.

Common Specifications and Options

ItemDescription
Rotor DesignsDetachable (bolted) knife holders, welded knife holders, or integrated rotor
Rotary Knife TypeSquare knives with four usable cutting edges
Drive MountingReducer fixed on the machine frame
Feeding SystemHorizontal hydraulic ram with PLC-controlled, adjustable speed
Control SystemPLC with automatic forward and reverse rotor operation
Suitable MaterialsPlastic, wood, paper, cable, light metals such as aluminum and copper

Request Quote

Back to Main Page