Dual Shaft Shredder - ToronPR™ DSS Series
Dual Shaft Shredder for Mixed Plastics, Electrical Waste and Bulky Industrial Scrap
The dual shaft shredder also sold as a double shaft shredder or twin shaft shredder tears mixed plastics, electrical waste, wood, metal, and bulky household and industrial waste into strips ready for sorting, further shredding, or disposal. Recyclers, waste processors, and electronics recovery plants use it where material is too large, mixed, or tough for a single shaft machine. The ToronPR™ DSS uses two counter-rotating shafts fitted with hooked knives that grab, pull in, and shear material. Six models cover throughput of 400 kg/h through 5,000 kg/h.
The interlocking knives feed themselves, so bulky items drop into the hopper and the rotors draw them down without a ram. A PLC starts, stops, and reverses the shafts automatically, and sensors protect the drive against overload and jamming. Knives come in a range of thicknesses and hook counts, so each machine is set up for the material it will see most. High-strength, wear-resistant knife steel keeps cutting edges working through abrasive and contaminated waste.
Two motors, one per shaft, deliver motor power up to 90 + 90 kW on the largest model. Feed openings up to 2,400 × 1,900 mm accept appliances, drums, pallets, and baled waste. Output can go straight to sorting or to a secondary shredder or granulator for finer sizing. Torontech matches each model and knife configuration to the material, throughput, and downstream process.
Dual Shaft Shredder - ToronPR™ DSS Series Applications

This mixed waste shredder suits the first size-reduction stage for bulky, mixed, or tough material.
- Electronic Waste Recycling: shredding WEEE, appliance housings, circuit boards, and small electronics ahead of separation
- Mixed Plastics Recycling: reducing mixed rigid plastics, containers, and crates before sorting and washing
- Wood and Pallet Recycling: shredding pallets, crates, and construction wood for biomass or board production
- Metal and Composite Scrap: processing drums, light metal parts, and plastic-metal composites such as appliance shells
- Municipal and Bulky Waste: reducing furniture, mattresses, and large household waste for sorting or refuse-derived fuel
- Industrial Waste Processing: handling production waste, packaging barrels, and mixed scrap from manufacturing plants

Dual Shaft Shredder - ToronPR™ DSS Series Key Features
The shredder pairs self-feeding hook knives with high torque and automatic protection for mixed and bulky waste.
- Self-Feeding Hook Knives: hooked knives grab and pull material into the cutting zone without a ram or pusher
- Configurable Knife Sets: knives come in different thicknesses and hook counts, matched to the material being processed
- High-Strength Knife Steel: wear-resistant knife material holds its edge on abrasive and contaminated waste
- Low Speed, High Torque: slow shaft rotation delivers the torque needed to tear dense, tangled, or tough loads with low noise
- PLC Control with Auto-Reverse: the PLC handles start, stop, and automatic reversing to clear jams
- Overload and Jam Protection: sensors detect overload conditions and trigger the reverse cycle to protect the drive
- Independent Shaft Drives: each shaft has its own motor, with power up to 90 + 90 kW on the largest model
- Wide Material Range: handles mixed plastics, electrical waste, wood, metal, tires, and bulky household and industrial waste
- Six Capacity Options: models span 400 kg/h through 5,000 kg/h
Theory and Method
Dual shaft shredding works by shearing material between two sets of interlocking knives. Two parallel shafts carry rows of knife discs separated by spacers, and the knives on one shaft sit in the gaps between the knives on the other. The shafts rotate toward each other at low speed. Material caught between them is gripped by the knife hooks and sheared along the knife edges, much like a set of heavy scissors.
Hooks on each knife do the feeding. As the shafts turn inward, the hooks bite into the material and pull it down into the cutting zone, so the machine needs no ram or pusher. Knife thickness sets the strip width of the output. Thin knives suit fragile material such as boards and packaging, while thick knives with fewer hooks handle tires, pallets, drums, and metal.
Low speed gives the shafts very high torque, which the machine needs to tear through dense or tangled loads. When a hard object stalls the rotors, overload sensors signal the PLC to stop and reverse the shafts. Reversing frees the object and repositions it, and the PLC then resumes forward shredding. This automatic cycle protects the drive and keeps the machine running on unpredictable mixed waste.
Dual Shaft Shredder - ToronPR™ DSS Series Technical Specifications
Models 600 to 1000
| Parameter | ToronPR™ DSS 600 | ToronPR™ DSS 800 | ToronPR™ DSS 1000 |
|---|---|---|---|
| Capacity | 400-600 kg/h | 500-800 kg/h | 800-1,200 kg/h |
| Motor Power | 11 + 11 kW | 15 + 15 kW | 22 + 22 kW |
| Rotor Diameter | 280 mm | 280 mm | 400 mm |
| Rotor Speed | 15-20 rpm | 15-20 rpm | 15-20 rpm |
| Rotary Blades | 20 pcs | 20 pcs | 20 pcs |
| Fixed Blades | 20 pcs | 20 pcs | 20 pcs |
| Chamber Size | 600 × 450 mm | 800 × 450 mm | 1,000 × 650 mm |
| Feed Opening Size | 1,000 × 1,100 mm | 1,200 × 1,100 mm | 1,600 × 1,400 mm |
| Discharge Opening Size (H × W) | 720 × 610 mm | 720 × 810 mm | 940 × 1,035 mm |
| Dimensions (L × W × H) | 2,500 × 750 × 1,980 mm | 3,200 × 750 × 1,980 mm | 4,150 × 2,200 × 2,300 mm |
| Weight | 2,850 kg | 3,400 kg | 4,500 kg |
Models 1200 to 1800
| Parameter | ToronPR™ DSS 1200 | ToronPR™ DSS 1500 | ToronPR™ DSS 1800 |
|---|---|---|---|
| Capacity | 1,500-2,000 kg/h | 2,000-3,000 kg/h | 3,000-5,000 kg/h |
| Motor Power | 37 + 37 kW | 55 + 55 kW | 90 + 90 kW |
| Rotor Diameter | 440 mm | 500 mm | 600 mm |
| Rotor Speed | 15-20 rpm | 15-20 rpm | / |
| Rotary Blades | 24 pcs | 30 pcs | 30 pcs |
| Fixed Blades | 24 pcs | 30 pcs | 30 pcs |
| Chamber Size | 1,200 × 700 mm | 1,500 × 730 mm | 1,800 × 920 mm |
| Feed Opening Size | 1,800 × 1,600 mm | 2,100 × 1,700 mm | 2,400 × 1,900 mm |
| Discharge Opening Size (H × W) | 940 × 1,200 mm | 1,000 × 1,500 mm | 1,000 × 1,800 mm |
| Dimensions (L × W × H) | 4,670 × 2,600 × 2,400 mm | 5,500 × 2,800 × 2,600 mm | 6,200 × 2,800 × 2,800 mm |
| Weight | 7,600 kg | 11,500 kg | 14,500 kg |
Parameters are for reference only and may change according to the final configuration.
Knife Options and Common Specifications
| Item | Description |
|---|---|
| Knife Hook Styles | Single, double, four-hook, and multi-hook |
| Knife Thickness Range | High-strength wear-resistant tool steel, hardness and thickness selected to suit the material |
| 10 to 20 mm Knives | Fragile material such as packaging and electrical boards |
| 40 to 50 mm Knives | Tires, plastic products, wood pallets, and film |
| 80 mm Knives | Metal items and plastic-metal composites, such as appliances and drums |
| Knife Material | D2 tool steel |
| Knife Hardness | HRC 55 to 60, adjusted according to material |
| Drive | One motor per shaft, low speed and high torque |
| Control System | PLC with start, stop, automatic reverse, and overload protection |
| Suitable Materials | Mixed plastics, electrical waste, wood, metal, tires, large household waste, industrial waste |