Continuous Monitoring System for Heavy Metals in Flue Gas
The Continuous Monitoring System for Heavy Metals in Flue Gas is a comprehensive solution for the rapid online analysis of heavy metal pollutants in flue gas. This system uses the principle of isokinetic sampling of particulate matter and heat tracing extraction technology to automatically concentrate particles from smoke and dust onto a coil filter membrane for high-precision XRF analysis.
Continuous Monitoring System for Heavy Metals in Flue Gas enables continuous automatic monitoring of particulate matter concentration from fixed pollution sources, as well as the concentration of gaseous pollutants and total pollutant discharge. The system then transmits monitoring data and information to the relevant environmental protection authorities, ensuring that pollutant concentrations and total pollutant discharge from industrial facilities meet regulatory standards.
Battery manufacturing
Waste incinerator
Waste incinerator
Coal-fired power plants
Iron and steel plant, non-ferrous metal smelter
Waste incineration plant
The mine
Petrochemical plant
Flexibility
Generally, analysis results can be obtained every 15 minutes. The sampling and analysis time can be programmed, and measurement results are displayed in real-time, allowing for convenient on-site data viewing.
Data transmission
Continuous Monitoring System for Heavy Metals in Flue Gas equipped with RS232/485, USB, GPRS, ADSL, Ethernet, and various other data transmission modes, the system enables remote transmission, monitoring, and inspection of operational parameters, status updates, and data.
Safety
The Continuous Monitoring System for Heavy Metals in Flue Gas undergoes professional radiation treatment to prevent any radiation leakage, ensuring safety and reliability during operation.
Intelligent
The Continuous Monitoring System for Heavy Metals in Flue Gas features automatic quality control, utilizing internal standard elements to automatically verify the long-term stability of the system. With no personnel required for continuous operation, it offers simple operation and maintenance. Additionally, apart from the filter belt, there are minimal daily supplies needed.
Alarm system
Continuous Monitoring System for Heavy Metals in Flue Gas with an intelligent alarm system, it includes alerts for various abnormalities such as sample temperature, condenser temperature, heating temperature, and low flow rate, ensuring prompt detection and response to any deviations.
Data storage
The Continuous Monitoring System for Heavy Metals in Flue Gas and system feature a log function that records the operating parameters, serving as the foundation for ensuring the accuracy and reliability of system data traceability.
Method of measurement | Energy dispersion type, using XRF to identify the metal content of particulate matter in the air |
Main monitoring element | Ti, V, Cr, Mn, Fe , Co, Ni , Cu, Zn , Ga , As, Se, Sr , Pb , Rb, Mo , Hg , Ba , Cd , Sb , Sn and more than 20 elements |
Size | 435×510×660mm（L×W×H） |
Weight | 85KG |
Measuring range | 0～5000 μg/m3 |
Detection limit | ≤ 0.1 μg/m3 |
Linearity | Correlation coefficient≥ 0.99 |
The gas temperature | -20 ~ 600 ℃ |
Gas pressure | -20 ~ 50 kPa |
The gas flow velocity | 0~30 m/s |
Sampling and analysis time | 10～120min |
Sampling flow rate | (0-5) L/min adjustable, constant sampling |
Calibration | Daily automatic calibration |
Filter membrane replacement cycle | 1 month |
Working environment conditions | Temperature -20~50℃, humidity 0~90%RH |
Communication interface | RS232/RS485/RJ45, GPRS module can be configured |
The power supply | 220VAC±10%(50±1Hz) (110V also available) |