Portable Cutting Mill

Portable Cutting Mill

Back to Sample Preparation Equipment
Portable Cutting Mill

Portable Cutting Mill can perfectly process regular or irregular samples and it is an ideal machine for heavy-metal-free ROSH and WEEE tests (e.g. rubber, plastics, garbage, circuit board, etc.).

Sample type: soft, hard, tough, fibrous

Typical sample: plastic, rubber, wood, circuit board etc

  • The maximum capacity is 60 ml.
  • Easy operation and cleaning.
  • The grinding process is rapid and produces less heat. So it is suitable for grinding temperature-sensitive materials.
  • The rotor and the sieve can be easily installed, removed & replaced.
  • The smaller volume cutting chamber can be cleaned easily and thoroughly.
  • The grinding set can avoid cross-contamination has heavy-metal-free material for the choice to meet different laboratory requirements.

Portable Cutting Mill processes the sample by the strong cutting and shear force. Samples are fed from the hopper and then fall into the grinding chamber. The samples are crushed many times through the shearing action between the rotor and cutting blades. Then the sample is crushed again through the shearing action between the rotor and sieves. Once the sample size is smaller than the aperture of the sieve, they will enter into the receiving container.

Feed size ＜10mm
Final fineness 0.3-4mm (Final fineness can be controlled by selection of the different size of sieve)
Speed 500-3000rpm，adjustable, digital display 
Batch quantity 60g
Sieves 0.3、0.5、1.0、2.0mm
Net weight 13kg