OPTICAL EMISSION ANALYZER - OES - Optical Emission Spectrometer - TTOES 8000

Optical Emission Spectrometer - TTOES 8000

Introduction

Optical Emission Spectrometer - TTOES 8000 is capable of testing all interesting spectral lines within the wavelength range utilizing full spectrum test technology of CCD detector. Test bases, channels and analytical programs can be easily configured and added. The instrument is compact for laboratory placement and easy to be maintained. As a generic instrument used in steel and non-ferrous materials test, it is most optimized for analyzing Fe-based, Cu-based, Al-based, Ti-based, Pb-based, Mg-based, Co-based materials.

Full spectrum analysis technology; open for more bases and elements; user can easily configure or add their own elements on their sites.

Its compactness does not require big laboratory space

Full-time operation with superior stability and reliability

Short test time, single test takes less than 40 seconds

Simple operation and maintenance, no professional requirements on the operators

Software produces accurate test results and provides a complete alloy grade database.

Standard samples for periodical calibration of instrument

No chemical solvent is used, ensuring a safe and environment-friendly testing process

As a fast, accurate, stable and reliable steel and non-ferrous metals analyzer for dozens of elements in industrial research and development, process control, incoming inspection, product sorting, etc., TTOES 8000 is indispensable to production of high quality metal products these days.

Full spectrum detection of metals and elements

Full spectrum technology based on CCD detector makes multi-bases and multi-element test in various metals possible.

Test bases, channels, analytical programs can be easily configured and added at the users’ sites after delivery.

Core components come from international top suppliers in the industry.

Spectral dispersion part, or the grating, is made by German Zeiss that delivers excellent spectral resolution.

Spectral detector, or CCD, is made by Hamamatsu of Japan, sensitive to spectral lines and low noise.

Optical lenses are made from quartz glasses and fluorinated magnesium imported from other countries, featuring high transmittance of effective wavelengths.

Optical chamber constant temperature system

The thermostatic chamber, equipped with a reaction type heating device and an insulation layer, stays constant in temperature.

In this way, light path drift caused by minor change of mechanical parts under temperature variation is minimized. In routine maintenance, tracing is not required, which will be saved for special circumstances only.

Meanwhile, a detector working in constant temperature environment helps to stabilize photoelectric conversion.

Rapid and simultaneous analysis of multi-elements in steel and non-ferrous metals

TTOES 8000 can show test results in at most 40 seconds after the pretreated sample is placed on the sample platform.

Nearly all common elements in steel and non-ferrous metals can be tested depending on customer demand.

Professional Test Solutions

Torontech offers users the proven test solutions in steel and non-ferrous metal industry derived from its extensive experience in testing technology research and service.

Analytical programs are categorized in view of the content of elements, so as to satisfy diverse test requirements of users.

Analytical programs are calibrated with international and national standard samples and are fitted and corrected by professional instrument software.

Users can rely on a small number of standardized samples provided by the manufacturer to maintain the machine. There is no burden of purchasing a large number of standard samples for production of programs.


Optical System	Panchen-Runge mounting, Rowland circle, diameter 400mmmWavelength range: 134-690nmResolution: 10pmConstant temperature: 35℃±0.5℃Cast with purpose-made materials to achieve minimized deformation of optical chamber
Concave grating	Groove density: 2400l/mmDispersion rate for primary spectrograph:1.04 nm/mm
Detector	High performance linear CCD
Time of analysis	Usually less than 40s depending on samples
Spark Source	(Digital Spark Plasma) DSP(High Energy Pre Spark) HEPSFrequency: 100/-1000HzCurrent:1-80A
Spark Platform	3mm analytical gap to sample platformSpray electrodeNo flow in standby mode, low argon consumption
Working condition	Working temperature: 15-30℃Relative humidity：≤70%Power: 220±5V, uniphase 50Hz, earthing resistance＜1ΩNo vibration, dust, strong electromagnetic interference, strong air flow, corrosive gas in the laboratory.
Dimension & Weight	Height 435mm, width 900mm, depth 600mmWeight: 120 kg
Power	Consumption max: 1500WStandby: 70w

Quote Form

First Name

Last Name / Surname

Phone Number

Company Name

Company Type

Country

State/Province

Product Interest

Timeline

Message

HOW CAN WE HELP YOU ?

Contact our sales team for a quotation.

Please Contact us for pricing, check availability, or ask for additional information about our Optical Emission Spectrometer – TTOES 8000

OPTICAL EMISSION ANALYZER - OES - Optical Emission Spectrometer - TTOES 8000

Optical Emission Spectrometer - TTOES 8000

Introduction

HOW CAN WE HELP YOU ?

Torontech Group International

Quick Links

Test & Analytical

Healthcare

Plastic Recycling

Pumps & Valves

Copyright © 2024 Torontech Inc. All Rights Reserved. USA • Canada • Mexico • Latin America • GCC/Africa • SE Asia