AES Carbon & Sulfur Infrared Analyzer 1000
-
Torontech Carbon & Sulfur Infrared Spectrometer 1000
enlarge image
The Infrared Carbon & Sulfur Spectrometer is a high frequency automatic inductive combustion furnace which can measure the carbon and sulphur carbon and sulphur in cement, steel alloys, non-ferrous metals, other materials and alloys. This high-tech product integrates many of the sought out features for the various industries. It is applicable to many different industries.
The unit is designed with the user in mind and therefore very easy to operate. The carbon and sulfur analysis is capable of both the ultra low and higher content analysis. The high-speed sampling and the dynamic data analysis procedure improves the analysis sensitivity and accuracy rating. Using the 7.5kVA high-frequency ceramic power tube the samples are burned adequately and its stability is good.
| Technical Specifications | |
|---|---|
| Detection | High-frequency infrared absorptive detection |
| Range of measurement | Carbon: 0.0001% - 10.0000% (can extend to 99.9999%) Sulfur: 0.0001% - 3.5000% (can extend to 99.9999%) |
| Analysis precision | Carbon: RSD≤1 % , Sulfur: RSD≤1.5% |
| Sensibility | 0.1ppm |
| Analysis Cell | One Carbon Cell & Sulfur Cell |
| Time of analysis | 20-60s can setting usually 35s |
| High-frequency furnace | power ≥2.5kVA |
| Oscillation frequency | 18MHz |
| Electronic balance Accuracy of reading | 0.0001g |
| Indoor temperature | 10-30 °C |
| Relative humidity | ＜90% |
| Voltage | AC 220V ±5% |
| Frequency | 50Hz ±2% |
| Oxygen | Purity ≥ 99.5% and pressure is 0.18Mpa ±5% |
High-Frequency Reaction combustion furnace
- Safety features include automatic leak hunting and over current warning
- The Current or voltage or power of the furnace can be adjusted to your own choice
- Temperature can be adjusted to suit the testing of different samples
- High-precision flow controller can guarantee the stability of the air current
- Ultra fine dust filter of 0.4µm insures the complete separation between the dust &gas
- Low tension heating and constant temperature in furnace improves the percent conversion of Sulfur which stabilizes the analysis result
- Snap-in type burner cleans automatically thus reducing the influence of dust
- High-pressure ash discharge system sweeps away the dust in the pipeline thoroughly
Infrared Carbon & Sulfur Analyzer
- The circuit adopts double CPU system which consists of both upper and lower computer of modular design. The lower computer uses a single control chip which results in the high degree of the electronic circuit integration, stability and reliability
- Infrared detection and high-frequency furnace components are connected optically and operate on a multilevel isolated circuit resulting in the prevention of interference
- The infrared light source is tailor-made from platinum in which results in high efficiency of the spectral characteristics and caloricity
- Can be continuously used for long periods of time
Analysis Software
- Analysis channel provides channel management function of carbon and sulfur which can be added, deleted and edited
- Analysis of the dynamic data, sampling 24 times/s, improve the sensitivity & accuracy rating of analysis and manage the sample is done by the use of the software
- The results of the Carbon &Sulfur are shows in real-time data and Carbon & Sulfur release curve are analyzed dynamically
- The data processing function results are stored by using the ACCESS database. All the analysis results and curves of Carbon &Sulfur can be stored every time and the results can be queried when required
- The self diagnosis function is able to detect the sealing of the furnace head and gas chamber by software.