Optical Fiber Cable Impact Tester
Optical Fiber Cable Impact Tester is used to determine the ability of optical fiber cable withstand impact.
The Optical Fiber Cable Impact Tester TT-OFI-Series allows a hammer with a 25mm rounded edge to drop vertically on a cable sample fixed on a flat steel plate. The machine has ability to allow single or multiple repeated impacts on the cable sample. The energy of the impact is determined by the drop height and by the weight of the hammer.
Standard procedures: Optical Fiber Cable Impact Tester
- Repeated impact test - The hammer drops 25 times on the same location in the cable sample.
- The hammer is allowed to drop on 3 different locations on the cable, typically separated by 50cm from each other. The number of impacts in each location is limited.
Optical Fiber Cable Impact Tester TT-OFI-Series Technical Specifications
|Model & Specification||TT-OFI-Series|
|Impact height||300mm, 1000mm, adjustable.|
|Mass blocks||0.5Kg, 1Kg, 2Kg, 3Kg, and 6Kg|
|Test Frequency Range||10 ~ 30 times per min.|
|Ambient humidity||Less than 80% (Non-condensing).|
|Power (kW)||2KW - 3 phase, 50HZ|