Metallurgical Belt Grinders

You are here

Metallurgical Belt Grinder Series - TT-BeltGrind-GP - General Purpose Belt Grinder

The Metallurgical Belt Grinder Series - TT-BeltGrind-GP - General Purpose Belt Grinder is used for flat Coarse grinding prior to fine grinding. The specimens to be ground in 60, 80 or 120 grit after cutting or moulding operation to remove surface imperfections. Useful step to remove light metallurgical damage in the specimen surface induced during cut-off operation.

Features of the Metallurgical Belt Grinder Series - TT-BeltGrind-GP - General Purpose Belt Grinder

  • ½ HP single phase motor
  • 100 x 915 Endless belt
  • Easy belt change mechanism
  • Dust receiver
  • Size: 660 x 430 mm (26” x 16.9”)

Torontech TT-BeltGrind-H Heavy Duty Belt Grinder

Metallurgical Belt Grinder Series - TT-BeltGrind-H - Heavy Duty Belt Grinder

The Metallurgical Belt Grinder Series - TT-BeltGrind-H - Heavy Duty Belt Grinder is for grinding the surface of bigger specimens. Sturdy Construction and bigger belt affords the possibility to grind forgings, castings and similar heavy components.

Features of the Metallurgical Belt Grinder Series - TT-BeltGrind-H - Heavy Duty Belt Grinder

  • 1 HP 3 phase motor
  • Simplified belt release mechanism
  • 150 x 1220 mm (5.9” x 48”) endless abrasive belt
  • Spring loaded idler pulley for smooth drive
  • Mechanical variable speed design
  • Size: 700 x 620 x 1150 mm (27.6” x 24.4” x 45.3”)

 


Metallurgical Belt Grinder Series - TT-BeltGrind-SSG - Heavy Duty Spectro Grinder Single Speed

Torontech TT-BeltGrind-SSG Heavy Duty Spectro Grinder Single Speed GrinderThe Metallurgical Belt Grinder Series - TT-BeltGrind-SSG - Heavy Duty Spectro Grinder Single Speed is for grinding the surface of the bigger specimens, sample preparation from castings and similar heavy components. Sturdy construction.

Features of the Metallurgical Belt Grinder Series - TT-BeltGrind-SSG - Heavy Duty Spectro Grinder Single Speed

  • 1 HP 3 phase motor
  • 14" Vacuum Disc for emery
  • Single Speed 2880 rpm
  • 1 HP Vacuum system
  • Size: 1050 X 650 X 900 mm (41.3” x 25.6” x 35.4”)

 

 

 


 

Metallurgical Belt Grinder Series - TT-BeltGrind-TWIN-WET - Wet Twin Belt Grinder

Torontech TT-BeltGrind-TWIN-WET Wet Twin Belt GrinderThe Metallurgical Belt Grinder Series - TT-BeltGrind-TWIN-WET - Wet Twin Belt Grinder is for flat Coarse grinding prior to fine grinding. The specimens to be ground in 60,80 or 120 grit after cutting or moulding operation to remove surface imperfections. Useful step to remove light metallurgical damage in the specimen surface induced during cut-off operation.

Features of the Metallurgical Belt Grinder Series - TT-BeltGrind-TWIN-WET - Wet Twin Belt Grinder

  • Two grinding belts, Water cooling mechanism belt centering
  • Anticorrosion M.S Base with powder coated SS cover
  • Endless Grinding belts: 100 x 915 mm (3.9” x 36”)
  • Spindle Speed 1400 rpm
  • Electrical Interlock System, Water Connection 1x R ½” recirculation
  • Water Valve: Right & Left
  • Dimension WxHxD: 630 x 250 x 520 mm (24.8” x 9.8” x 20.5”)
  • T-slot table, Cam Vise
  • Motor: 1 HP 3 Phase
  • Easy belt change mechanism

Metallurgical Belt Grinder Series - TT-BeltGrind-VSG - Heavy Duty Spectro Grinder Variable Speed

Torontech TT-BeltGrindGrind-VSG Heavy Duty Spectro Grinder Variable SpeedThe Metallurgical Belt Grinder Series - TT-BeltGrind-VSG - Heavy Duty Spectro Grinder Variable Speed is for grinding the surface of bigger specimens, castings and similar heavy components. Sturdy construction.

Features of the Metallurgical Belt Grinder Series - TT-BeltGrind-VSG - Heavy Duty Spectro Grinder Variable Speed

  • 1 HP 3 phase motor
  • 14" Vacuum Disc for emery
  • Variable Speed 100 to 2880 rpm
  • 1 HP Vacuum system
  • Size: 400 x 1000 x 700 mm (15.8” x 39.4” x 27.6”)

Torontech Group International

Phone: +1 416 368 2721
Fax: +1 416 981 7652
E-mail: Sales dept: sales@torontech.com
Customer service: support@torontech.com
Address: 7030 Woodbine Ave., Suite #500, Markham, ON L3R 6G2, Canada