Metallography Equipment

You are here

ToronTech’s Metallography equipment offers its customers value and accuracy at an affordable price. Our range of Metallography machines and instruments includes Cutting, Grinding & Polishing machines, Metallurgical Microscopes and Mounting press machines. 

Metallography

Metallography is the study of the physical structure and components of metals, typically using microscopy.

The surface of a metallographic specimen is prepared by various methods of cutting, grinding, polishing, and etching. After preparation, it is often analyzed using optical or electron microscopy. Using only metallographic techniques, a skilled technician can identify alloys and predict material properties.

Mechanical preparation is the most common preparation method. Successively finer abrasive particles are used to remove material from the sample surface until the desired surface quality is achieved. Torontech offers a complete line of machines for mechanical sample preparation for metallography analysis to meet different demands for quality, capacity, and reproducibility.

Metallographic specimens are typically "mounted" using a hot compression thermosetting resin. When specimens are very sensitive to temperature, "cold mounts" may be made with a two-part epoxy resin. Mounting a specimen provides a safe, standardized, and ergonomic way by which to hold a sample during the grinding and polishing operations.

After mounting, the specimen is wet ground to reveal the surface of the metal. The specimen is successively ground with finer and finer abrasive media. After grinding the specimen, polishing is performed. After polishing, certain microstructural constituents can be seen with the microscope, otherwise, the microstructural constituents of the specimen are revealed by using a suitable chemical or electrolytic etchant.

Spectroscopy

Spectroscopy and spectrography is the measurement of radiation intensity as a function of wavelength. Spectral measurement devices are referred to as spectrometers, spectrophotometers, spectrographs or spectral analyzers. Optical emission spectrometry (OES) and X-Ray fluorescence are most commonly used techniques for the analysis of metals and solid samples. It is crucial to have the sample properly prepared. The sample needs to be both representative, homogeneous and with an even surface in order to eliminate factors that can influence the results. 

The surface spectroscopy sample is prepared by various methods of cutting, grinding and polishing, Successively finer abrasive particles are used to remove material from the sample surface until the desired surface quality is achieved. Torontech offers a complete line of machines for mechanical sample preparation for spectroscopy analysis to meet different demands for quality, capacity, and reproducibility.

Petroscopy

Petrography is the study of origin, composition, distribution and structure of rocks. The mineral content and the textural relationships within the rock are described in detail. The classification of rocks is based on the information acquired during the petrographic analysis with petrographic microscope. The detailed analysis of minerals by optical mineralogy in thin section and the micro-texture and structure are critical to understanding the origin of the rock. Electron microprobe analysis of individual grains as well as whole rock chemical analysis by instruments such as atomic absorption analyzers and X-ray fluorescence analyzers.

The surface of a rock specimen is prepared by various methods of cutting, grinding and polishing, Successively finer abrasive particles are used to remove material from the sample surface until the desired surface quality is achieved. Torontech offers a complete line of machines for mechanical sample preparation for petroscopy analysis to meet different demands for quality, capacity, and reproducibility.

Available Products

Metallography Abrasive & Precision Cutting Machines

Torontech offers The Metallography Abrasive & Precision Cutter - ToronCut is a sturdy floor model general purpose cutter.

Metallurgical Sample Preparation Polishing Machines

The Metallography Polisher - ToronPol - Automatic Polishing Machine is a practical and economic auto polishing machine. 

Metallurgical & Spectro Grinders - ToronGrind

Metallurgical & Spectro Grinders - ToronGrind - General Purpose Belt Grinder is used for flat Coarse grinding prior to fine grinding.

Mounting Press Machine - ToronMount

Torontech offers Durable and cost effective automatic Mounting Press Machine - ToronMount.

Metallurgical Microscopes & Profile Projectors

Metallurgical Microscopes & Profile Projectors - ToronProscope are designed for measuring and viewing surfaces and studying materials. 

Petroscopy Sample Preparation Machines - ToronGeo

ToronGeo TTGeo series of Petroscopy Sample Preparation Machines

Hardness Testers-ToronHard

Hardness Testers - ToronHard

Special Purpose Cutting Machines

Special Purpose Cutting Machines

Torontech Group International

Phone: +1 416 368 2721
Fax: +1 416 981 7652
E-mail: Sales dept: sales@torontech.com
Customer service: support@torontech.com
Address: 7030 Woodbine Ave., Suite #500, Markham, ON L3R 6G2, Canada