AES Inductively Coupled Plasma Spectrometer 700
The inductively coupled plasma spectrometer works on the principles of atomic emission spectroscopy and is a very precise and analytical instrument. The ICP can measure more than 70 elements that are diversified from microanalysis to constant analysis. Its applications range from steel, geology, metallurgy, thulium, plating, cement, oil, chemical, environmental detection, metals, sanitation, food, geoponics, scientific research, health, college mine factory, oil, water quality, and many others.
| Technical Specifications: AES Inductively Coupled Plasma Spectrometer 700 | |
|---|---|
| Analytic speed | Over 10 element per minute |
| Precision | Relatively standard deviation RSD≤2% (short time) |
| Stability | Relatively standard deviation RSD≤3% (one hour time) |
| Measure line range | ≥5 scalar class |
| Inspect lowest limit | Typical element inspect limit reference below table |
| Quartz tubes | Φ20mm three concentric type |
| Nebulizer | Φ6mm coaxial type |
| Atomization chamber | Φ35mm double canister type |
| Plasma gas flow | 100-1000L/h |
| Assistant gas flow | 6-60L/h |
| Carrier gas volume | 6-60L/h |
| Carrier gas pressure | Maximum 0.3Mpa |
| Circuit type: | Self oscillate circuit, coaxial-cable output, matching tune |
| Work frequency | 40MHz |
| Frequency stability | <0.1% |
| Power output | 800-1200W |
| Power output stability | <0.2% |
| Power supply | 220V 25A |
| Light way system | Czerny Turner type |
| Focus | 750mm &1000mm |
| Grating | Ion etch holographic grating, density 3600 line/mm & 2400 line/mm and area 80x100mm |
| Resolving power | ≤0.008nm |
| Scan wavelength range | 3600line/mm or 2400line/mm |
| Scan wave length range | 195 nm-500nm or 195nm-800nm |
| Scan step distance | 0.0006nm |
| Scan repeat quality | ≤0.0006nm |
| Inspection system | The F/V switch circuit controlled by single chip |
| Sampling time | 100ms-10s |
| Photomultiplier Tube | R212UH |
| PMT negative high voltage | 200-990V, stability ≤0.05% |
Main features: AES Inductively Coupled Plasma Spectrometer 700
- High stability of radio frequency output
- Light source is stable, the detection limit is low and readings can reach PPb levels
- The range of linearity of the curves can reach 5 to 6 orders of magnitude.
- Multi-elemental analysis can be done at the same time in a rapid manner
- It can analyze all the metallic elements and some nonmetallic elements of the periodic table of elements resulting in about 70 elements.
- The software for the ICP Spectrometer 700 uses analysis & operation software where the operation is convenient and fast resulting in quick testing, processing, correcting of data.
